chairs Tester is used to test the strength and durability of each part of furniture through each part of furniture is under one-off or repetitive load in the normal use or wrong use condition.It is used for testing the mechanical performance of all kinds of chairs.
Technical parameters:
Specification of frame:3m x 3 mx2.3m,(L×W×H), it is made of 80x80mm aluminum
Loading cylinders:Five horizontal and Five Vertical, diameter:50mm,route:300mm,
Loading force value(Max) on the theory: 1500Nþ Force value induction:high-precision power sensor
Max Capacity:3KNþ (3000N)
Control way:PLC control
Air source:Air supply input is 0.4Mpa-0.8Mpa. (6kgf/cm^2 or above, supplied by customer themselves)
>>> Additional component
- Having ‘connectors’ on control panel for ease integration
- Stopper 12mm thickness
This test rig can be used for doing the horizontal/vertical static loading test and also can do horizontal /vertical durability test.
The tester adopts the structure of frame to design.The frame is made of high quality industrial aluminum, beautiful and generous.The adjustable part of the frame adopts pulley structure to design in order to adjust the loading position to adapt to different specifications of sample.The position handle is convenient to locate so that the tester can improve the efficiency of work.
The fixed block at the bottom can be adjusted freely different position to adapt to different specifications of sample.
Feature:
1.Europe standard aluminum profile
(Thickness and strength 5 times higher than industry)
2. U.S.-origin high-precision force sensors
3. Ades a cylinder
4. Portable magnet retainer
5. Customize the 1 to 1 load block to standard
Standards
i) Seat and back static/durability test--EN1728:2012 6.4/ 6.17
ii) Seat front edge static test--EN1728:2012 6.5
iii) Armrest upward and downward static test--EN1728:2012 6.13/6.11
iv) Legs forward/sideways static test--EN1728:2012 6.15/6.16
v) Back impact test--EN1728:2012 6.25
vi) Seat impact test--EN1728:2012 6.24
